Stainless steel Lost Wax Casting Parts 304(1.4308) and 316(1.4408)

Sebon is specialized in304(1.4308) and 316(1.4408) austenitic stainless steel lost wax casting process. The stainless steel casting products are widely used for auto-car components, Machinery & Pump Parts, Marine Parts, valve parts, pipe parts, etc.
Stainless steel cast 304(1.4308)
This is the most common stainless steel and is applied in different applications. It consists of at least 18% chromium and 8% nickel and has no magnetic properties within its austenitic structure.
Stainless steel 304L(1.4309)
Corresponds to stainless steel 304. The “L” stands for “low carbon”, so this stainless steel has a lower carbon amount to increase weldability and to limit the corrosion sensitivity after welding.
Stainless steel cast 316(1.4408)
A better, but more expensive type of corrosion resistant steel is stainless steel 316. This alloy contains at least 16% chromium, 10% nickel and 2% molybdenum. Because of the addition of molybdenum, this stainless steel type is better defended against salt corrosion and acids, and is often applied in chemical industries.
Stainless steel cast 316L(1.4409)
Comparable to stainless steel 316 but with a lower carbon level to increase weldability of the stainless steel.
17-4 PH cast (1.4549)
A high quality stainless steel which is regularly used in the aircraft industry. It is characterized by a high tensile strength, hardness, toughness and is also corrosion resistant.