Stainless Steel Casting Blind Strips

Stainless steel blind roads are road facilities designed to help blind people walk. The blind roads are generally paved by two types of bricks. One type is strip-shaped walking bricks, which guides the blind people to move forward with confidence, called the blind road. The first type is the hint brick with dots, which indicates that there are obstacles in front of the blind and need to turn. This is called reminder stop blind roads.
Stainless Steel Casting Blind Strips Features:
1. It can be used all day, with strong abrasion resistance, good weather resistance and durability.
2. Good elasticity, strong compression resistance and good impact resistance.
3. Strong guiding.
4. Easy to lay and install.
Stainless Steel Casting Blind Strips Installation:
1. Preparation materials: stainless steel blind strips, AB dry hanging glue, cable arranging device, broom, rag, drilling machine, cutter, hair dryer, brush, spoon
2. Clean the floor first, if necessary, wipe it with a rag
3. According to the blind path of the site, arrange the cable, mark the punching point, and the cable should be straight.
4. Punch, first break the ground with a small drill bit, then drill a large drill bit to avoid breaking the ground. Use a blower to blow out the debris in the hole. It is best to test the ground before punching. If the ordinary drill does not work, change the drill.
5. Use AB dry glue in the hole. (If special reinforcement is needed, it can also be glued under the stainless steel blind plate.)
6. Install the stainless steel blind strips and nails.
7. Use a rubber hammer or a wooden hammer to tighten the blind strip and the nail.
8. Clean up the on-site debris.